» Industry News » The Four Most Important Criteria to Choose a Swab for Cleaning Validation

The Four Most Important Criteria to Choose a Swab for Cleaning Validation

2022-09-06

In pharmaceutical manufacturing, the product must not be contaminated by previous product as well as it should not be contaminated with the cleaning agent used for equipment cleaning.

To verify the cleaning process it is validated by taking the sample from various parts of cleaned equipment that is to be used in the manufacturing process and these samples are analyzed for contamination.

Swabs are used to take a sample from the cleaned equipment for analysis. Contaminants of previous product or cleaning agent residues are eluted from the swab. The analysis is done by HPLC or GC to determine the amount of residues. TOC analyzer can also be used to determine all the oxidizable carbon compounds.

To get the accurate results, it is required to use the correct swab to take the sample because swab is the main component that has the highest chances of error and may result in the inaccurate cleaning validation. Following are the four most important criteria to choose a swab for cleaning validation.

Minimal Extractable Interferences

Extractable interferences are the residues of the swab itself. The contaminants extracted from the swab during its use should be the minimum. These are the contaminants in the blank swab i.e. swab in the solvent used to take a sample.

Solvent Compatibility

A variety of solvents are used for swab sampling according to the residues of the previous products.Therefore, the swab must not have any chemical reaction with the solvent used for sampling because this may alter the actual cleaning validation results. Therefore, swab must be compatible especially with the solvent to be used for the swabbing.

High Recovery Rate

Recovery rate is the percentage of the released amount of the sampled content. A swab doesn’t release whole swabbed content but it should release the maximum that it can. Minimum 60 % recovery rate is acceptable but the higher recovery rate is better.

Low Particle Generation

Every swab sheds particles during its use on equipment surface and it is difficult to find a non-particle shedding swab at all. But we must select a low particle generating swab because these particles will contaminate the next product that will be manufactured on that equipment.

All the above features should be considered before selecting the swab for cleaning validation sampling.You may add more things in this list like the size of the swab, swab must be sufficient in size to cover the sampling area by 5-10 swabbing. A bigger swab will be able to hold more material from the sampling surface.

A swab plays an important role in successful cleaning validation. Hence swab for sampling must be selected carefully because it can ruin all your validation activit

 

Source: Pharmaceutical Guidelines

Maybe you like also

  • ABOUT US


    Medico Technology Co., Ltd. is a professional manufacturer of medical supplies in China, we produce and sale nylon flocked swabs, VTM kit, saliva collection kit and CHG swab & applicator.

  • CONTACT US

    Address: Room 201, 301 and 401 Building A No.10, Bao long 5th Road, Tongle Community, Baolong Street, Longgang District,Shenzhen, Guangdong, China.

    Web:  www.medicoswab.com

    Phone Number:  +86 0755-28997664

    Email: info@medicoswab.com