Medico nasopharyngeal swab manufacturer

Medico nasopharyngeal swab manufacturer

What is the Medico Nasopharyngeal Flocking Swab used for?

It is used to transport nasopharyngeal swab specimens or tissue specimens of specific parts from the sampling site to the testing laboratory for PCR extraction and testing.

How to use nasopharyngeal swab:
Uno: Use 50 fresh tissue samples with nasal sampling swabs
1. Estimate the volume of this product required to completely immerse the sample (1g tissue requires 10mL).
2. Mark the collection tube and add the estimated amount of this product.
3. Cut the sample into pieces with a thickness of less than 0.5 cm at the fastest speed.
4. Completely immerse the tissue pieces in the product in the collection tube.
5. Store the collection tube in a place with proper temperature.
6. Remove the sample from the storage place (samples stored at -20°C or -80°C must be thawed at room temperature), and use sterile forceps to remove the tissue fragments from the protective solution.
7. Immediately start RNA extraction or other processing (such as dividing the sample into smaller pieces and then resaving them). Nota: The sample can be repeatedly frozen and thawed twenty times without affecting its RNA quality.

Medico Disposable Nasopharyngeal Swab Operating Instructions
Fare un passo 1: Hold the handle and gently insert the sampling swab into the nasal cavity.
Fare un passo 2: Gently rotate the sampling swab 3-5 volte, and then take it out slowly.
Fare un passo 3: Put the extracted sample into the sample collection tube, break the handle, and then seal it to complete the sampling.