使い捨てウイルスサンプリングチューブを選択する際に注意すべき点?

There are many disposable ウイルス採取管 on the market, しかし品質にもばらつきがある. 一般的な品質問題には次のようなものがあります。: サンプル保存液漏れ, チューブカバーの破損, サンプル保存液の変色, ラベル剥離, 等. ウイルスサンプリングチューブはサンプルを保管するための容器です, そしてその品質問題は核酸検出の結果に直接影響します。. そう, what should we pay attention to when choosing a single-use virus sampling tube?

1. Material suitability. According to the implementation guidelines of nucleic acid testing institutions, there are clear requirements for materials, “The cap and tube body should be made of polypropylene material, the screw mouth can be sealed, the sealing performance is moderate, and the gasket is covered inside, which is resistant to freezing. The tube body is transparent and visible, good. したがって, when filing the record, enterprises should directly choose a virus sampling tube made of polypropylene, with a gasket in the cover, and the cover and the body are sealed in a spiral way. The virus is inactivated at 56°C. したがって, the virus sampling tube should have the temperature tolerance under the above conditions, will not be deformed and damaged under the test conditions, and can adapt to various inactivation methods. During the development process, The selected materials should be further verified and confirmed.

2. Sealing. The cap and the tube body should be matched together. Try to choose a screw port instead of a plug-in type, so that it is in a completely closed state. さもないと, it will cause the leakage of the preservation solution and the entry of exogenous substances, which will affect the quality of the product and cause pollution and damage. risk of infection. In the technical indicators, an indicator for testing the tightness of the seal should be set to simulate the tightness of the product under different storage conditions. The general test methods include vibration method, vacuum method, 等.

3. 操作が簡単. The wall of the tube should be smooth and flat, the label is complete and firm, the handwriting is clear, the information is easy to write, and the relevant bar code should not fall off the corner. 同時に, the tightness of the bottle cap and the tube body should be moderate and not too tight, so that the sampling and testing personnel can normally open and close the bottle cap with one hand, which improves the operation efficiency.

4. Appropriate specifications. The outer diameter of the virus sampling tube is (14.8 ± 0.2) mm × (100.5 ± 0.4) んん, the outer diameter of the cap is (15.8 ± 0.15) んん, and the height is (12.5 ± 0.5) んん. The company’s filing products should select the best specification and model of the virus sampling tube according to the above requirements, so that the products produced meet the requirements of epidemic prevention.