选择一次性病毒采样管需要注意什么?

There are many disposable 病毒采样管 on the market, 但质量也参差不齐. 常见的质量问题包括: 样本保存液泄漏, 管盖损坏, 样品保存液变色, 标签脱落, 等等. 病毒采样管是样本储存的容器, 其质量问题直接影响核酸检测结果. 所以, what should we pay attention to when choosing a single-use virus sampling tube?

1. Material suitability. According to the implementation guidelines of nucleic acid testing institutions, there are clear requirements for materials, “The cap and tube body should be made of polypropylene material, the screw mouth can be sealed, the sealing performance is moderate, and the gasket is covered inside, which is resistant to freezing. The tube body is transparent and visible, good. 所以, when filing the record, enterprises should directly choose a virus sampling tube made of polypropylene, with a gasket in the cover, and the cover and the body are sealed in a spiral way. The virus is inactivated at 56°C. 所以, the virus sampling tube should have the temperature tolerance under the above conditions, will not be deformed and damaged under the test conditions, and can adapt to various inactivation methods. During the development process, The selected materials should be further verified and confirmed.

2. Sealing. The cap and the tube body should be matched together. Try to choose a screw port instead of a plug-in type, so that it is in a completely closed state. 否则, it will cause the leakage of the preservation solution and the entry of exogenous substances, which will affect the quality of the product and cause pollution and damage. risk of infection. In the technical indicators, an indicator for testing the tightness of the seal should be set to simulate the tightness of the product under different storage conditions. The general test methods include vibration method, vacuum method, 等等.

3. 易于操作. The wall of the tube should be smooth and flat, the label is complete and firm, the handwriting is clear, the information is easy to write, and the relevant bar code should not fall off the corner. 同时, the tightness of the bottle cap and the tube body should be moderate and not too tight, so that the sampling and testing personnel can normally open and close the bottle cap with one hand, which improves the operation efficiency.

4. Appropriate specifications. The outer diameter of the virus sampling tube is (14.8 ± 0.2) mm × (100.5 ± 0.4) 毫米, the outer diameter of the cap is (15.8 ± 0.15) 毫米, and the height is (12.5 ± 0.5) 毫米. The company’s filing products should select the best specification and model of the virus sampling tube according to the above requirements, so that the products produced meet the requirements of epidemic prevention.