In healthcare facilities, ensuring that reusable medical devices are thoroughly cleaned before disinfection or sterilization is critical for patient safety. One of the most effective methods for verifying cleaning effectiveness is АТФ-тестирование.
СПС (Adenosine Triphosphate) testing provides rapid and objective evidence of residual organic contamination on medical devices and surfaces. By measuring ATP levels, healthcare professionals can assess whether cleaning procedures have successfully removed biological residues such as blood, салфетка, бактерии, и другая органика.
This article explains the ATP test procedure, its importance, required materials, step-by-step testing instructions, and how ATP swab products can improve cleaning verification programs.
What Is ATP Testing?
СПС, or Adenosine Triphosphate, is the universal energy molecule found in all living cells, в том числе:
- Human cells
- Blood residues
- Bacteria
- Yeast
- Mold
- Plant materials
When ATP comes into contact with a special bioluminescent reagent, a light reaction occurs. The amount of light produced is directly proportional to the amount of ATP present in the sample.
An ATP monitoring system measures this light and reports the result in Relative Light Units (RLUs). Lower RLU values indicate cleaner surfaces, while higher values suggest residual contamination remains after cleaning.
ATP Test Procedure: Пошаговое руководство
Materials Required
Before performing ATP testing, prepare the following:
- ATP test swab device
- ATP luminometer (ATP meter)
- Sterile gloves
- Clean scissors (если необходимо)
- Sample collection accessories
For narrow internal channels such as endoscopes, specialized ATP sampling swabs are recommended.
Шаг 1: Wear Sterile Gloves
Always wear sterile gloves and follow aseptic techniques throughout the sampling process.
Proper handling helps prevent contamination that could affect ATP test results.
Шаг 2: Соберите образец
Insert the ATP sampling swab into the channel or area being tested.
For endoscope channels:
- Remove the sterile ATP swab from its package.
- Carefully feed the swab through the internal channel.
- Allow the swab to contact the entire internal surface.
- Withdraw the swab completely from the device.
The sampling process should be performed immediately after cleaning and before high-level disinfection or sterilization whenever possible.
Шаг 3: Передача образца
Place the collected sample into the ATP test device according to the manufacturer’s instructions.
If a detachable sampling tip is used:
- Insert the tip into the ATP test tube.
- Ensure the tip reaches the bottom of the tube.
- Secure the test device for activation.
Шаг 4: Activate the ATP Reagent
Activate the ATP test device by releasing the reagent contained within the test tube.
Обычно:
- Bend or snap the activation valve.
- Squeeze the reagent bulb.
- Allow the reagent to flow onto the sample.
The reagent reacts with ATP present on the swab tip.
Шаг 5: Mix the Sample
Shake the ATP test device vigorously for approximately 10 секунды.
This ensures complete contact between the sample and the reagent, producing a reliable bioluminescent reaction.
Шаг 6: Read the Sample
Insert the activated ATP test device into the luminometer.
The instrument will measure the light emitted from the reaction and calculate an RLU value.
Most ATP systems provide results within 10–15 seconds.
Шаг 7: Interpret the Results
The RLU value indicates the cleanliness level of the tested area.
General interpretation guidelines:
| Результат |
Interpretation |
Recommended Action |
| Low RLU |
Чистый |
No action required |
| Moderate RLU |
Предупреждение |
Re-test or investigate |
| High RLU |
Fail |
Re-clean and retest |
Each ATP monitoring system may have specific pass/fail thresholds established by validation studies or facility protocols.
ATP Sampling Solution from MEIDIKE GENE
MEIDIKE GENE ATP Swab
For ATP cleanliness verification of endoscopes and cannulated medical devices, MEIDIKE GENE ATP Swab is specifically designed to collect samples from hard-to-reach internal channels.
АТФ-мазок 3 мм
АТФ-мазок 2 мм
Ключевые особенности
- High-absorption sponge tip for efficient ATP collection
- Flexible polypropylene shaft for navigating curved channels
- Available in multiple tip diameters:
- 2 мм × 240 мм
- 3 мм × 240 мм
- Suitable for endoscope lumen sampling
- Стерильный, single-use design
- Customizable specifications available
Приложения
- Endoscope cleaning verification
- Medical device cleanliness monitoring
- ATP bioburden testing
- Infection prevention programs
- Hospital sterile processing departments
Преимущества
✔ Improves sampling efficiency in narrow channels
✔ Helps obtain more representative ATP samples
✔ Supports cleaning validation protocols
✔ Reduces the risk of false-negative results caused by inadequate sample collection
